Residential, body corporate and commercial deck restorationCall 0451 252 501

Original Gold Coast deck planning resource

How to compare deck restoration quotes

Know what is included in sanding, oiling and repairs before choosing a deck restoration quote on the Gold Coast.

Talk through your deck

Direct answer

What should a deck restoration quote include?

A useful written quote identifies the measured area, the existing timber and coating, preparation method, repairs, products and coats, detailed areas, access, protection, exclusions and final price terms. Without these details, two quotes can look similar while covering different work.

This guide helps you ask better questions. It does not replace an inspection, licence checks or a building safety assessment.

Compare the same work, not just the same dollar figure.

Check in the quoteWhat to askWhy it matters
Measured scopeWhat area was measured? Are stairs, rails and edging included?Flat floor area rarely reflects all labour on an intricate deck.
Old coatingIs the existing product known? Does it need chemical stripping or mechanical removal?Incompatible or failing films should not simply be coated over.
Surface preparationWhat cleaning, fixing checks, sanding stages and edge work are included?The preparation often determines appearance and coating life.
Repairs and structureAre soft boards or moving rails excluded pending qualified inspection?Coating work cannot resolve unsafe structural elements.
Finish systemWhich brand and product, number of coats and maintenance directions?Coating systems vary in application and ongoing care.
Site conditionsWho moves furniture, protects pool water, manages dust and plans wet weather?Access and nearby areas can materially change the scope.
Commercial termsIs GST included, when is payment due, and how are extra works approved?A clear variation process reduces surprises.
If there are loose railings, bouncy decking, soft supports or corrosion, ask a qualified building professional for a safety assessment before approving a cosmetic restoration. Queensland Government recommends at least annual inspections. Official inspection guidance.

Start here

Five questions to send with every quote request

  1. Can you confirm whether the deck needs cleaning, sanding, stripping or repairs first?
  2. Can you itemise floorboards, stairs, edges and handrails?
  3. What coating system will be used and what is its care guidance?
  4. What site protection and weather contingencies are included?
  5. What is excluded, and how will extra work be priced and approved?

Example: why two quotes can differ

Example scope A

Clean and maintenance coat

The old compatible coating is sound, fixing checks identify no obvious problems and only maintenance preparation is needed.

Ask for the cleaning process, coating compatibility, product and coats in writing.

Example scope B

Strip, sand and refinish

The existing coating peels, the timber has uneven colour and detailed handwork is needed around rails or steps.

Ask about removal of the failed finish, edge preparation, repairs and coating system.

Frequently asked questions

Does every deck need a full sand before oiling?

No. Sound, compatible finishes may be maintained with the preparation specified by the product manufacturer. Loose coating, rough weathered fibres or uneven old finishes may call for more intensive preparation.

Can a deck be restored if the timber is soft?

Soft or moving timber may signal decay or damaged framing. A cosmetic finish should wait until the condition has been assessed and any required repairs completed safely.

Should the cheapest quote win?

Not until you check whether the coating removal, preparation, detailing, repairs and protection are comparable. A smaller scope can be reasonable, but it should be explicit.

Have a deck to assess?

Tell us the suburb, rough area, visible issues and the work you have in mind. We'll discuss the practical next step.

Call nowGet a quote